Apple Watch is a versatile and popular smartwatch, loved for its all-in-one combination with other Apple devices and an excess of features. However, like any electronic device, it can encounter issues, including getting stuck on the Apple logo.
If your Apple Watch is experiencing this problem even after a hard reset, don’t worry; this article will guide you through the steps to resolve it.
ALSO, READ MORE POSTS ON: – Best Apple Watch for Small Wrist: Top Picks for Apple watch
Apple Watch Stuck on The Apple Logo Even After A Hard Reset
The Apple Watch can sometimes freeze on the Apple logo due to problems inside its software or settings being set up incorrectly. These problems could involve things like issues with how it connects to other devices or having the wrong time zone set.
When this happens, you might notice that the logo stays on the screen for a long time or the watch turns off by itself after a short while. This issue can happen with many different models of Apple Watches and is pretty common.
Why Does the Apple Watch Get Stuck While Booting? (H2),
The Apple Watch may get stuck while booting (starting up) for various reasons, including:
- Software Issues: Sometimes, the watch’s operating system or firmware may encounter errors or glitches during the boot-up process, causing it to freeze on the Apple logo.
- Misconfigurations: Incorrect settings or configurations within the watch’s software can lead to booting problems. This might include issues with connectivity settings or time zone settings.
- Corrupted Software: If the watch’s software becomes corrupted, it can hinder the normal booting process, leading to the device getting stuck.
- Update Problems: Attempting to install an update that doesn’t complete successfully can leave the watch in a stuck state during boot.
- Hardware Issues: In rare cases, hardware problems or component malfunctions within the watch can also cause booting problems.
- Low Battery: If the watch’s battery is critically low, it may not have enough power to complete the boot process and could get stuck.
- Firmware Incompatibility: If there is an issue with the watch’s firmware or it’s not compatible with the current software version, this can lead to booting problems.
When troubleshooting a stuck Apple Watch during boot (H2), it’s typically advisable to start with basic steps like restarting the watch, checking for software updates, and ensuring that the watch is adequately charged. However, keep scrolling as I show you the steps to set up your H2 app watch.
Force Restart the Apple Watch (H2)
If your Apple Watch is stuck or frozen, you can follow these steps to try and resolve the issue:
A force restart can often resolve minor software glitches and get your Apple Watch working again. The steps to force restart your Apple Watch depend on the model:
For Apple Watch Series 3 and later:
- Press and hold both the side button and the digital Crown concurrently.
- Keep holding both buttons until you see the Apple logo appear and disappear, then release them.
- Your watch should restart.
For Apple Watch Series 2 and earlier:
- Press and hold both the side button and the Digital Crown simultaneously.
- Keep holding both buttons until you see the Apple logo appear and disappear, then release them.
- Your watch should restart.
Check for Software Updates (H2)
- Outdated software can lead to various issues, so make sure your Apple Watch is running the latest watchOS version. To check for updates:
- Connect your watch to its charger and ensure it’s charged above 50%.
- Connect your iPhone to Wi-Fi and ensure it’s connected to the same Wi-Fi network as your watch.
- On your iPhone, open the Watch app.
- Locate “My Watch” > “General” > “Software Update.”
- If an update is available, tap “Download and Install” and follow the on-screen instructions.
Reset Network Settings (H2)
If you’re experiencing connectivity issues or your watch is stuck during an update, resetting network settings can help:
- On your iPhone, go to “Settings.”
- Scroll down and tap “General.”
- Scroll down and tap “Reset.”
- Choose “Reset Network Settings.”
- Enter your iPhone passcode to confirm the action.
Force Quit and Reopen Apps (H2)
If a specific app on your Apple Watch is causing it to become unresponsive, you can try force quitting the app:
- On your Apple Watch, press the side button to access the Dock.
- Swipe left or right to search for the problematic app.
- Swipe up on the app’s card to force quit it.
- Reopen the app and check if the issue is resolved.
Unpair and Re-Pair Your Apple Watch (H2)
If none of the above steps work, you may need to unpair and re-pair your Apple Watch with your iPhone:
- On your iPhone, open the Watch app.
- Go to “My Watch” > your watch’s name > “Unpair Apple Watch.”
- Follow the on-screen instructions to unpair the watch.
- After unpairing, set up your Apple Watch again by following the initial pairing steps.
If your Apple Watch is still stuck and unresponsive after trying these steps, it’s advisable to contact Apple Support or visit an Apple Store for further assistance. There may be an underlying hardware problem that needs professional attention.
ALSO, READ MORE POSTS ON: – Apple Watch Review
Force Restart the Apple Watch(H3),
To force restart an Apple Watch, follow these steps briefly:
- Press and Hold the Side Button: Locate the side button on your Apple Watch (it’s below the Digital Crown). Press and hold this button.
- Keep Holding Until You See the Apple Logo: Continue holding the side button until you see the Apple logo appear on the screen. This usually takes about 10-15 seconds.
- Release the Side Button: Once the Apple logo is visible, release the side button. Your Apple Watch will now restart.
These force restart procedures can help resolve various issues, including a watch that is unresponsive or stuck on the Apple logo during boot.
Unpair the devices (H3),
To unpair an Apple Watch from an iPhone, you can follow these steps (H3):
- Keep the Devices Close: Make sure your iPhone and Apple Watch are physically close to each other.
- Open the Watch App: On your iPhone, open the “Watch” app. It’s typically a white icon with a multicolored watch face.
- Go to My Watch: Inside the Watch app, tap on the “My Watch” tab located at the bottom of the screen.
- Select Your Apple Watch: You’ll see a list of your connected devices. Tap on your Apple Watch’s name to access its settings.
- Unpair the Watch: On the next screen, you’ll find the option to “Unpair Apple Watch.” It might ask for your Apple ID password to confirm the unpairing.
- Backup and Erase Data (Optional): If you wish to back up your Apple Watch data before unpairing, you can choose to do so. Otherwise, you can select “Erase Apple Watch Content and Settings” to unpair and reset the watch to its factory settings.
- Confirm Unpairing: Confirm your choice to unpair the devices. This will begin the unpairing process, and your watch will be disconnected from your iPhone.
- Complete the Unpairing: Once the process is complete, your Apple Watch will display the “Welcome” screen, indicating it’s no longer paired with your iPhone.
Unpairing your devices will remove the watch’s data from your iPhone, and you’ll need to set it up again if you wish to use it with the same or a different iPhone in the future.
ALSO, READ MORE POSTS ON: – Apple Watch most expensive case in the World 2023
Check for software updates (H3)
To search for software updates on your Apple Watch:
- Ensure your watch is connected to your iPhone.
- Next, open the Watch app on your iPhone.
- Go to “My Watch” > “General.”
- Select “Software Update” to check for and install any available updates.
Erase Apple Watch (H3)
To erase your Apple Watch and reset it to its factory settings, follow these steps (H3):
On Your Apple Watch:
- Open the “Settings” app on your Apple Watch. You can do this by pressing the Digital Crown to access the apps, and then find and tap the “Settings” app (it looks like a gear icon).
- Scroll down and tap “General.”
- Scroll down again and tap “Reset.”
- Choose “Erase All Content and Settings.”
- If your watch has a passcode set, you’ll be prompted to enter it.
- Confirm the action by tapping “Erase All” when prompted.
On Your iPhone:
- First, open the “Watch” app on your paired iPhone.
- Go to the “My Watch” tab.
- Click your Apple Watch’s name at the top of the screen.
- Tap the “I” icon next to your watch’s name.
- Choose “Unpair Apple Watch.” This will also erase the watch if it’s still connected.
Please note that erasing your Apple Watch will remove all data, settings, and configurations from the watch. If you have an iCloud or encrypted backup of your watch, you can restore it after the reset.
ALSO, READ MORE POSTS ON: – Platinum Cartier: Revolution of Cartier Tank Cintrée
